Restomod Air Products Included in Build
INVent A/C Controls – Quantum Housing
Aftermarket A/C Controller made from Precision CNC Machined 6061/T6 Aluminum. The worlds first Fully electronic controller and vent in one. Finishes Available in Satin, Polished, Synister Black.
Vapir III Compact Custom Air Conditioning Kit
The Vapir III Compact Climate Control System is similar to the Vapir II but with a new distribution duct design to give you independent adjustability between dash, defrost and floor modes. The Vapir III A/C system was designed to install on a smooth firewall with our multi-mount system.
Diablo Round A/C Bulkhead with Cap Screws
Aftermarket A/C Bulkhead made from Precision CNC Machined 6061/T6 Aluminum. Finishes Available in Satin, Polished, Synister Black.
1967 C-10 Long Bed by TMI Products
A lot was done to this C-10. The Hood itself– was a big conversation piece. It is a stock 1967-68 C10 hood from Classic Industries – but they cut out the hood grilles from a 1967 Chevelle SS and welded them into the C10 hood – hood is all steel, custom and one off. To move this C-10 a 5.3 LS engine was used Trick Flow Cams / Trick Flow Heads. That will do it. A Restomod Air Polished Diablo Round Bulkhead was used to connect all the a/c hoses to make a killer build. Made from precision CNC Machined 6061/T6 Aluminum this bulkhead is top notch.
The Best was used
Inside this sick 67 C-10, there is custom TMI Sport X custom interior with custom plaid inserts, done in a distressed green vinyl. This sets off the Lamborghini California Orange paint job. For the A/C TMI Products went with Restomod Air Vapir III. Our most up to date in technology. With a new distribution duct design to give you independent adjustability between dash, defrost and floor modes it was a must for this build.
To control this Vapir III system The worlds first Fully electronic controller and vent in one, the INVent. You heard correct, all in one. The INVent Controller is like nothing else. Now you are able to control your Fan, Mode, and Temp within three separate vents. The fully integrated A/C controls with-in the vent are what make it most innovated controller anyone has ever come up with. To install the Restomod Air polished INVent system TMI Products shaved the ashtray and radio to put this controller front and center. Looks killer.
It also has TMI 5 piece carpet kit, CPP Steering Column. Door hardware from Classic Industries. Dakota Digital Gauge Cluster.
Here is the break down Outside/Suspension/Brakes
All the bodywork, custom metal, and paint were done by Kiwi Classics and Customs. Paint is a Lamborghini California Orange by Matrix Automotive Finishes and is polished with Adams Polishes. Trim/Bed is done by Mar-K and the Weather stripping was done by Precision. All replacement metal, glass, badges, patch panels, bumpers, grilles, etc came from Classic Industries / OER. Wheels are 20” Templars by US MAGS – these are the first 6 lug/spoke version of this wheel they’ve made. Continental Sport Trac Tires. Headlights are from United Pacific. Door Handles are from GSI Fabrication. Brakes are CPP 14” 6 piston disc brakes all around.
More under the Hood
A Restomod Air TruMOD 67-72 condenser kit was used. This kit is super easy to install. It has an Edelbrock Intake and FiTech Retro LS system. TMI Products went with Doug Thorley Headers and Painless wiring. All lines/fittings are from RedHorse Performance. Champion Cooling Radiator. B&M 4L80E transmission. All American Billet Hinges, pulley kit and overflow tanks. Lokar Dip sticks/throttle linkage
All Fluids filled with Redline Oil Products. Flowmaster Series 10 exhaust kit. CPP Street Beast Hydro Stop system.