Restomod Air Custom A/C Kits & Parts

Restomod Air Products Included in Build

Haymaker II Custom Air Conditioning Kit

The Full Size Climate Control System with A/C & Heat with Infinite Blend between Dash, Defrost, and Floor. The Haymaker II A/C system is designed for a flat firewall installation and is the top of the line, the most stylish, most powerful, and toughest aftermarket A/C Kit.

$975.00 Add to cart

Elevate Push Button A/C Controls Cyan LED

Aftermarket A/C Controller made from Precision CNC Machined 6061/T6 Aluminum. The smooth push button controller. Finishes Available in Satin, Polished, Synister Black.

Polished
Satin
Synister Black
$395.00$450.00 Select options

Quantum Lucky 7 Billet Aluminum A/C Vent

Aftermarket A/C Vent made from Precision CNC Machined 6061/T6 Aluminum. Finish Available (Bezel Only) in Satin, Polished, Synister Black.

Polished
Satin
Synister Black
$150.00$220.00 Select options

Quantum Dual – Lucky 7 Billet Aluminum A/C Vent

Aftermarket A/C Vent made from Precision CNC Machined 6061/T6 Aluminum. Finish Available in Satin, Polished (Bezel Only), Synister Black.

Polished
Satin
Synister Black
$300.00$400.00 Select options

1969 Chevy Suburban Tre 5 Customs

This truck built by Tre 5 Customs is a 1969 Chevy Suburban. The front of the truck received a 67 front sheet metal swap. Sitting flat on the ground. The drive train for this one is a Chevy Performance 525hp LS3 and 6-speed transmission. It is one of GM’s connect and cruise packages. This 1969 Chevy Suburban is set up on an air suspension system from Accuair. The chassis is all powder coated and painted, the engine compartment is super clean, the exterior is smoothed and painted, and the interior is clean and comfortable. With a 102” sliding rag top. With custom pin striping by Allen Wilkie and paint work by IKandy Paintworks, INC.

Cooling this bad boy are 2 count em’ 2 Haymaker II a/c systems. One tucked perfectly under the dash and one in the center console. Made specifically for full-size vehicles with large interiors cooling all this cab space is no problem for the Haymaker II. This guy features separate Dash, Defrost, and Floor modes with infinite blending between all positions and is engineered with large, separate A/C and heat coils (just like OEM systems).

To control both Haymaker II Tre 5 Customs went with 2 Synister Elevate Push Button LED controllers. One Synister Elevate controller is mounted in the dash and one is mounted in the back seat console to allow each compartment to control the temp in their area. Pretty slick. You can individually push in your Fan, Mode, Temp knobs and they pop out to allow for easy speed, mode, and temperature adjustments. When you are done push in the backlit knob and it pops back to allow for a flush, clean looking dash.

To top it off Tre 5 Customs have Synister Quantum Lucky 7 A/C Vents mounted in the dash and a Synister Quantum Dual – Lucky 7 A/C Vent. The single and the dual complement each other just like the paint job and pinstriping on this Suburban does. The a/c vents are precision CNC Machined 6061/T6 Aluminum Body and Ball. Installation on these vents is simple; drill 2.5” slide vent bezels in the holes drilled and tighten up the back hose adapter. Done!

This 1969 Chevy Suburban built by Tre 5 Customs was at SEMA 2018 and was the winner of the Restomod Air Ultimate Style Killer Performance Award for best-executed installation of our products. The owner of this Suburban had it built this for his wife, one lucky girl.