We are famously known in the hot rod community for our Killer A/C systems, custom designed vents and sexy as hell bulkheads but we have much more. Restomod Air has all the small parts and accessories to finish your a/c install. We truly are a one-stop shop.
Restomod Air has all the popular Sanden compressors for a wide variety of applications, with cast aluminum finish (polished available). All air conditioning compressors come fully filled with oil, and all have a full warranty. Brackets are available to fit a huge variety of engines. One of our awesome salespeople can assist you in choosing the perfect air conditioner compressor for your restomod, muscle car, or pro-touring build just ask us.
All Restomod Air condensers “Heat Killers” as we call them have all aluminum parallel flow design specifically for R134a refrigerant, allows up to 40% more heat reduction capacity along with a dramatic difference in refrigerant flow and pressure drop compared to the obsolete standard tube and fin condenser. We have every size you could be looking for; from small street rods to the Humvee- HMMWV M998 we have it all.
With several drier options, you are sure to find the one that will work best with your vehicle. And if you are unsure one of our guys can inform you which is best for you, we have been doing this for a while. Each one comes with a large capacity with sight glass and switch port designed or all refrigerants and comes with a wide circle clamp bracket.
Our safety pressure switch is highly recommended on all A/C Systems. Pressure switch kit, also known as a safety switch and threads into port on receiver driers or in available in a T-fitting. Protects the system from excessively high or low system pressures. Kit includes a pressure switch, switch plug with butt splices, complete O-Ring Kit, lubricating oil tube, compressor label. We also have Trinary switches combine low and high-pressure compressor clutch cut-off functions plus an electric fan engagement signal at 254 psi. The low-pressure cut-off of these Trinary switches is 30 psi and the high-pressure cut-off is 406 psi. This is the perfect option when running electric fans.
Restomod Air offers a Universal hose kit includes barrier hoses for use with R134a refrigerant. All Restomod Air Fittings are black coated with O-ring connections with crimp ferrules. Kits for the R134a include fittings with charge port. Includes 8 ft. of #6 (Liquid) refrigerant hose, 4 ft. of #8 (Discharge) refrigerant hose, and 5 ft. of #10 (Suction) refrigerant hose, along with #6, #8, #10 hose mounting clamps, tie wraps, O-ring set, airtight and flexible firewall grommets and fitting lube. Large Capacity Receiver/Drier supplied 6” x 2.5” with switch port for the safety switch. Comes with a wide circle clamp supplied to mount your receiver/drier. Also supplied pressure switch, line fitting, and wire harness. Our hi-low pressure switch kit is highly recommended in all A/C systems. Cuts out at 28 lbs. when the system runs low on refrigerant. When the system over-pressures, it cuts out at 380 lbs. to prevent compressor and hose damage.
Our fittings are second to none. We have straight, 45, 90, 135 Heater Hose Fittings, that we offer in black if you desire. Why black? Restomod Air is all about Ultimate Style Killer Performance. Not only do we have the best-performing systems and parts but they look kick ass.
If you want hard lines we have that for you. Our large selection of seamless aluminum tubing with factory-formed ends and aluminum nuts are sure to impress. Each one is ready for you to custom bend (with hand bender) and polish. Superior design! No weld joints to leak or steel nuts to rust.
Finding small our loose parts can be a pain in the ass. No one likes to search endlessly on the Internet for an O-ring or some bracket they thought they had. Restomod Air has a complete line of small parts that you might need to finish your build. Thermostats, Water Valves, Expansion Valve we have them all. And if at any time you cannot find the part you are looking for, call us 1-866-784-4278 we can get it for you.
What Is The Point
We are the only true custom aftermarket a/c system manufacturer that provides both ultimate style and killer performance to any custom car build! No longer does your car’s AC system need to take a back seat to style and performance. Restomod Air has the ONLY premium line of complete custom aftermarket a/c systems and components that truly give your build cutting edge style with customizable options and high-performance cooling.
Restomod Air was created because custom car builders wanted more technology, more class, more quality, and more performance. Let’s be honest- the a/c aftermarket has gotten lazy and has forgotten to put any thought into style. Just mimicking the OEM, the market has substituted style with sub-par performance and plain vanilla flavoring. This has caused many of the great custom car builders to hide the aftermarket AC systems and parts, sacrificing performance, looks and wasted time.
We are not a re-seller. We engineer every Restomod Air product right here in Texas and are designed from the ground up. Starting with innovative ideas and sketches, our engineers then design and specify our new products using quality materials like 6061-T6 billet aluminum, titanium, carbon fiber, brass, copper, and steel. Sometimes when you want the best quality it’s easier to just build it yourself, but here at Restomod Air we do all the hard work for you!