Back

1967-1972 Chevy Truck TruMOD Air Conditioning Kit

$1,400.00$2,200.00

The 1967-1972 Chevy Truck TruMOD A/C Kit uses the Full-Size Climate Control System with A/C & Heat with Infinite Blend between Dash, Defrost, and Floor. The Haymaker-S A/C system is designed for a flat firewall installation and is the top of the line, the most stylish, most powerful, and toughest aftermarket A/C system.

Clear
Upgrade Your Kit (optional)
67 72 CHEVY TRUCK INTERIOR KIT This item: 1967-1972 Chevy Truck TruMOD Air Conditioning Kit
$1,400.00$2,200.00
$1,400.00$2,200.00
QUANTUM HOUSINGS CUT OUT FOR WEB
4 × Quantum Vent
Choose Your Ball
Finish
$150.00$170.00
SLIPSTREAM XL WITH CLASSIC RINGS STRAIGHT
1 × Slipstream XL A/C Controls Smooth Knobs With Cap Screws
Finish
System Options
$325.00 $130.00
products RESTOMOD AIR BULKHEAD DIABLO ROUND SATIN CAP FRONT
1 × Diablo Round A/C Bulkhead with Cap Screws
Finish
$300.00 $201.00
REMOTE AC CONTROL PRODUCT PHOTO
1 × REMOTE CONTROL
$199.00
Description
HAYMAKER S TOP

1967-72
CHEVY TRUCK

The 1967-72 Chevy Truck Trumod A/C Kit uses the full-size climate Control system with A/C & heat with infinite blend between dash, defrost, and floor. The Haymaker-S A/C system is designed for a smoothed firewall installation and is the most stylish, most powerful and toughest aftermarket A/C system.

What is TruMod you might ask? Trumod air conditioning systems are “Tru” to the specific make and model yet easily “modifiable”. With your TruMod System, you literally get the best of both worlds – model specific parts and the ability to customize your installation. Trumod A/C systems are designed for the vehicle that has a smoothed firewall. This allows the use of our multi-mount system for you to keep that perfectly smooth firewall using either the welded options for body phase or bolted options for completed (painted) cars.

Building your Trumod A/C kit is simple. All you have to do it choose your interior kit (factory air or heater only), condenser kit, optional compressor and optional compressor bracket.

INTERIOR KIT

Evaporator Unit – Heat & Cool

X-Act Fit A/C controller

Inline Bulkhead

Glovebox

ECU

Wiring harnesses

Screws + bolts + washers

Drain tube + elbow + grommet

Heater hose clamps

Heater + A/C hoses

Heater + A/C fittings

Vents + adapters

Remote heat dumps

Screws + bolts + washers

Duct hose

Installation instructions

Tech support

3 year warranty

67 72 CHEVY TRUCK INTERIOR KIT

CONDENSER KIT

Condenser

Discharge hose

Suction hose

Liquid hose

Aluminum tubes

Mounting brackets

Filter drier w/switch port

Filter drier bracket

Screws

Hi/low pressure switch kit

O-rings – oil tube kit

11 2022 CONDENSER KIT

COMPRESSOR

Cast Aluminum

Polished

Chrome

BRACKET

Big block

Small block

LS

COMPRESSORBRACKET 6 205

THE
HAYMAKER - S

Our Haymaker-S features separate dash, defrost and floor modes, all within our innovation in a case. Our multi-mount system makes the installation of this custom A/C system a breeze. No need for fabricating brackets or visible bolt heads. Simply use the template, mark your firewall, weld studs/drill & use the included stainless hex head bolts.

All our systems are engineered with large, separate A/C and heat coils – just like OEM systems. Some of our competitors market small, street rod type units that contain only one coil known as a common block coil. The overall size of the coil is compromised by circuiting heater tubes and A/C tubes into one coil, therefore creating less surface area to cool the air as it passes through the coil for less cooling capacity. Smaller is never better when it comes to coil and case size!

The Haymaker-S is even designed for easy upgrades. When we have new technology available, it is plug & play. You can even remove the blower motor, expansion valve & thermostat for servicing with the evaporator still in the vehicle.

HAYMAKER S
HAYMAKER S SPECS

X-ACT FIT
A/C CONTROL

For your 1967-72 Chevy Truck, we offer our X-Act Fit A/C Controller. The X-Act Fit A/C Controller is available for those who want to preserve a stock look with modern technology.

The controller is fully electronic with smooth operations and no connecting arms that will bind or break. It also has back lighting so adjusting while driving at night is quick and easy.

This controller even installs in your dash with no modifications! It was designed to fit directly into the OEM location with zero modification. Just plug-n-play. This control uses three knobs: mode features (dash, floor, defrost), temperature settings (hot, cold and everything in between) and speed.

67 72 CHEVY TRUCK CONTROL

MODEL
SPECIFIC PARTS

Your Chevy Truck Trumod A/C kit comes with model specific parts including: glovebox, pre-engineered condenser brackets, vents, vent adapters and more.

67 72 CHEVY TRUCK GLOVEBOX
Vehicle Fitment
Make Model Year
Chevy Pickup Truck 1967 - 1972