1968
CAMARO
The 1968 Camaro Trumod A/C Kit uses the full-size climate Control system with A/C & heat with infinite blend between dash, defrost, and floor. The Haymaker-S A/C system is designed for a smoothed firewall installation and is the most stylish, most powerful and toughest aftermarket A/C system.
TruMOD air conditioning kits are what we recommend for your vehicle. TruMOD Kits may have some model specific parts, but you have the ability to heavily customize your installation. TruMOD A/C Kits are designed for the vehicle that has a smoothed firewall. This allows the use of our multi-mount system for you to keep that perfectly smooth firewall using either the welded options for body phase or bolted options for completed (painted) cars.
Building your 1968 Camaro Trumod A/C kit is simple. All you have to do it choose your interior kit (factory air or heater only), condenser kit, optional compressor, and optional compressor bracket.
FACTORY AIR
INTERIOR KIT
Evaporator Unit – Heat & Cool
X-act Fit controller
Inline Bulkhead
Glovebox
ECU
Wiring harnesses
Screws + bolts + washers
Drain tube + elbow + grommet
Heater hose clamps
Remote heat dumps
Heater + A/C hoses
Heater + A/C fittings
Vents
Vent adapters
Defrost diffusers
Duct hose
Electronic water control valve
3 year warranty
HEATER ONLY
INTERIOR KIT
Evaporator Unit – Heat & Cool
X-act Fit controller
Inline Bulkhead
Glovebox
ECU
Wiring harnesses
Screws + bolts + washers
Drain tube + elbow + grommet
Heater hose clamps
Remote heat dumps
Heater + A/C hoses
Heater + A/C fittings
Vents
Defrost diffusers
Duct hose
Electronic water control valve
3 year warranty


CONDENSER KIT
Condenser, Size 19.5 x 15.5 x 1
Discharge hose
Suction hose
Liquid hose
Aluminum tubes
Mounting brackets
Filter drier w/switch port
Filter drier bracket
Screws
Hi/low pressure switch kit
O-rings – oil tube kit


COMPRESSOR
Cast Aluminum
Polished
Chrome
BRACKET
Small block
Big block
LS


THE
HAYMAKER - S
Our Haymaker-S features separate dash, defrost and floor modes, all within our innovation in a case. Our multi-mount system makes the installation of this custom A/C system a breeze. No need for fabricating brackets or visible bolt heads. Simply use the template, mark your firewall, weld studs/drill & use the included stainless hex head bolts.
All our systems are engineered with large, separate A/C and heat coils – just like OEM systems. Some of our competitors market small, street rod type units that contain only one coil known as a common block coil. The overall size of the coil is compromised by circuiting heater tubes and A/C tubes into one coil, therefore creating less surface area to cool the air as it passes through the coil for less cooling capacity. Smaller is never better when it comes to coil and case size!
The Haymaker-S is even designed for easy upgrades. When we have new technology available, it is plug & play. You can even remove the blower motor, expansion valve & thermostat for servicing with the evaporator still in the vehicle.




X-ACT FIT
CONTROLLER
For your 1968 Camaro, we offer our X-Act Fit A/C Controller. The 1968 Camaro X-Act Fit A/C Controller by Restomod Air is available for those who want to preserve a stock look with modern technology.
The 1968 Camaro X-Act Fit A/C Controller is model specific, meaning there is no guessing if it will fit. The 1968 Camaro X-Act Fit A/C Controller is fully electronic with smooth operations and no connecting arms that will bind or break. It also has back lighting so adjusting while driving at night is quick and easy.
This controller even installs in your dash with no modifications! It was designed to fit directly into the OEM location with zero modification. Just plug-n-play. This control uses three knobs: mode features (dash, floor, defrost), temperature settings (hot, cold and everything in between) and speed.


MODEL
SPECIFIC PARTS
Your Camaro Trumod A/C kit comes with model specific parts including: glovebox, pre-engineered condenser brackets, vents, vent adapters and more.


TEST FIT
YOUR RIDE
Still unsure this TruMOD A/C kit will fit? Sometimes you just need the peace of mind, we get that. All you have to do is order the mock box, pay the refundable deposit, test it in your vehicle and ship it back when you’re done.

