The 1966-70 Mustang Trumod A/C Kit uses the full-size climate Control system with A/C & heat with infinite blend between dash, defrost, and floor. The Haymaker-S A/C system is designed for a smoothed firewall installation and is the most stylish, most powerful and toughest aftermarket A/C system.
TruMOD air conditioning kits are what we recommend for your vehicle. TruMOD Kits may have some model specific parts, but you have the ability to heavily customize your installation. TruMOD A/C Kits are designed for the vehicle that has a smoothed firewall. This allows the use of our multi-mount system for you to keep that perfectly smooth firewall using either the welded options for body phase or bolted options for completed (painted) cars.
Building your 1969-70 Mustang Trumod A/C kit is simple. All you have to do it choose your interior kit (factory air or heater only), condenser kit, optional compressor, and optional compressor bracket.
Evaporator Unit – Heat & Cool
X-Act Fit A/C controller
Screws + bolts + washers
Drain tube + elbow + grommet
Heater hose clamps
Heater + A/C hoses
Heater + A/C fittings
Vents + adapters
Remote heat dumps
Screws + bolts + washers
3 year warranty
Condenser, Size 19.75 x 16 x 1
Filter drier w/switch port
Filter drier bracket
Hi/low pressure switch kit
O-rings – oil tube kit
289 – 302
352 – 390 – 428
HAYMAKER - S
Our Haymaker-S features separate dash, defrost and floor modes, all within our innovation in a case. Our multi-mount system makes the installation of this custom A/C system a breeze. No need for fabricating brackets or visible bolt heads. Simply use the template, mark your firewall, weld studs/drill & use the included stainless hex head bolts.
All our systems are engineered with large, separate A/C and heat coils – just like OEM systems. Some of our competitors market small, street rod type units that contain only one coil known as a common block coil. The overall size of the coil is compromised by circuiting heater tubes and A/C tubes into one coil, therefore creating less surface area to cool the air as it passes through the coil for less cooling capacity. Smaller is never better when it comes to coil and case size!
The Haymaker-S is even designed for easy upgrades. When we have new technology available, it is plug & play. You can even remove the blower motor, expansion valve & thermostat for servicing with the evaporator still in the vehicle.
For your 1969-70 Mustang, we offer our X-Act Fit A/C Controller. The X-Act Fit A/C Controller by Restomod Air is available for those who want to preserve a stock look with modern technology.
The X-Act Fit A/C Controller is model specific, meaning there is no guessing if it will fit. It is fully electronic with smooth operations and no connecting arms that will bind or break. It also has back lighting so adjusting while driving at night is quick and easy.
This controller even installs in your dash with no modifications! It was designed to fit directly into the OEM location with zero modification. Just plug-n-play. This control uses three knobs: mode features (dash, floor, defrost), temperature settings (hot, cold and everything in between) and speed.
Still unsure this TruMOD A/C kit will fit? Sometimes you just need the peace of mind, we get that. All you have to do is order the mock box, pay the refundable deposit, test it in your vehicle and ship it back when you’re done.