Back

1971-73 Mustang TruMOD Air Conditioning Kit

$1,400.00$2,275.00

1971-73 Mustang TruMOD A/C Kit uses the Full-Size Climate Control System with A/C & Heat with Infinite Blend between Dash, Defrost, and Floor. The final blow. The ultimate knock-out punch. In a boxing match its the best and most powerful closing statement you can make and its also what we call our most killer and take names air conditioning system. The Haymaker-S is the most stylish, most powerful and toughest system.

Clear
Upgrade Your Kit (optional)
71 73 MUSTANG TRUMOD GEN 3 PHOTO
This item: 1971-73 Mustang TruMOD Air Conditioning Kit
$1,400.00$2,275.00
$1,400.00$2,275.00
QUANTUM HOUSINGS CUT OUT FOR WEB
4 × Quantum Vent
Choose Your Ball
Finish
$150.00$170.00
QUANTUM REACTOR SMOOTH KNOB SATIN STRAIGHT
1 × Quantum A/C Controls with Reactor Smooth Knobs
Finish
$130.00$150.00
products QUANTUM BULKHEAD STRAIGHT
1 × Quantum Vertical A/C Bulkhead
Finish
$201.00$234.50
REMOTE AC CONTROL PRODUCT PHOTO
$199.00
Description
HAYMAKER S TOP

1971-73
MUSTANG

The 1971-73 Mustang Trumod A/C Kit uses the full-size climate Control system with A/C & heat with infinite blend between dash, defrost, and floor. The Haymaker-S A/C system is designed for a smoothed firewall installation and is the most stylish, most powerful and toughest aftermarket A/C system.

TruMOD air conditioning kits are what we recommend for your vehicle. TruMOD Kits may have some model specific parts, but you have the ability to heavily customize your installation. TruMOD A/C Kits are designed for the vehicle that has a smoothed firewall. This allows the use of our multi-mount system for you to keep that perfectly smooth firewall using either the welded options for body phase or bolted options for completed (painted) cars.

Building your 1971-73 Mustang Trumod A/C kit is simple. All you have to do it choose your interior kit (factory air or heater only), condenser kit, optional compressor, and optional compressor bracket.

INTERIOR KIT

Evaporator Unit – Heat & Cool

X-Act Fit A/C controller

Inline Bulkhead

Glovebox

ECU

Wiring harnesses

Screws + bolts + washers

Drain tube + elbow + grommet

Heater hose clamps

Heater + A/C hoses

Heater + A/C fittings

Vents + adapters

Remote heat dumps

Screws + bolts + washers

Duct hose

Installation instructions

Tech support

3 year warranty

71 73 MUSTANG TRUMOD GEN 3 PHOTO

CONDENSER KIT

Condenser, Size 19.75 x 16 x 1

Discharge hose

Suction hose

Liquid hose

Aluminum tubes

Mounting brackets

Filter drier w/switch port

Filter drier bracket

Screws

Hi/low pressure switch kit

O-rings – oil tube kit

11 2070 CONDENSER KIT

COMPRESSOR

Cast Aluminum

Polished

Chrome

BRACKET

289 – 302

5.0

352 – 390 – 428

COMPRESSOR 6 134 BRACKET

THE
HAYMAKER - S

Our Haymaker-S features separate dash, defrost and floor modes, all within our innovation in a case. Our multi-mount system makes the installation of this custom A/C system a breeze. No need for fabricating brackets or visible bolt heads. Simply use the template, mark your firewall, weld studs/drill & use the included stainless hex head bolts.

All our systems are engineered with large, separate A/C and heat coils – just like OEM systems. Some of our competitors market small, street rod type units that contain only one coil known as a common block coil. The overall size of the coil is compromised by circuiting heater tubes and A/C tubes into one coil, therefore creating less surface area to cool the air as it passes through the coil for less cooling capacity. Smaller is never better when it comes to coil and case size!

The Haymaker-S is even designed for easy upgrades. When we have new technology available, it is plug & play. You can even remove the blower motor, expansion valve & thermostat for servicing with the evaporator still in the vehicle.

HAYMAKER S
HAYMAKER S SPECS

X-ACT FIT
A/C CONTROL

For your 1971-73 Mustang, we offer our X-Act Fit A/C Controller. The X-Act Fit A/C Controller by Restomod Air is available for those who want to preserve a stock look with modern technology.

The X-Act Fit A/C Controller is model specific, meaning there is no guessing if it will fit. It is fully electronic with smooth operations and no connecting arms that will bind or break. It also has back lighting so adjusting while driving at night is quick and easy.

This controller even installs in your dash with no modifications! It was designed to fit directly into the OEM location with zero modification. Just plug-n-play. This control uses three knobs: mode features (dash, floor, defrost), temperature settings (hot, cold and everything in between) and speed.

71 73 MUSTANG XACT FIT CONTROL

MODEL
SPECIFIC PARTS

Your Trumod A/C kit comes with model specific parts including: glovebox, pre-engineered condenser brackets, vents, vent adapters and more.

71 73 MUSTANG GLOVEBOX

TEST FIT
YOUR RIDE

Still unsure this TruMOD A/C kit will fit? Sometimes you just need the peace of mind, we get that. All you have to do is order the mock box, pay the refundable deposit, test it in your vehicle and ship it back when you’re done.

MOCK UP BOXES HAYMAKER
Vehicle Fitment
Make Model Year
Ford Mustang 1971 - 1973