Back

Vapir III Compact Custom Air Conditioning Kit & Membrane Bundle Deal

$1,250.00

The Vapir III Compact Climate Control System is similar to the Vapir II but with a new distribution duct design to give you independent adjustability between dash, defrost and floor mode is bundled with 2 boxes Membrane Thermal Insulation with Sound Dampening Material to give your vehicle the ultimate cooling and heating capability at a $100 savings. The Vapir III was designed to install on a smooth firewall with our multi-mount system.

**No other discounts can be applied to this offer**

SKU: VAPIR III-MEMBRANE BUNDLE DEAL

Category:

Tags: , ,

Description

Now with a new distribution duct design to give you independent adjustability between dash, defrost and floor modes. Our most up to date in technology. Slightly larger than our Vapir II, but more controllability. We added new mounting features to make the installation of this custom A/C system even easier to mount into your vehicle. We have perfected our multi-mount system, which allows you to keep a perfectly smoothed firewall with no unsightly bolt heads. Fabricating brackets is not needed with our multi-mount system. Simply use the included template, mark firewall, and weld studs or drill and use the included stainless Hex head bolts.

The Vapir III bundled with Membrane bundle deal is designed for the best street rod builds or anywhere a small and powerful system is needed. Don’t let the small size fool you, this unit packs a ton of performance into that small space. This might be the most efficiently designed evaporator ever measuring at 21 inches long, 8 inches deep, and only 11 tall. This Vapir III is bundled with 2 boxes of Membrane Thermal Insulation with Sound Dampening Material to give your vehicle the ultimate cooling and heating capability at a $100 savings.

ALL our systems are engineered with large, separate A/C and heat coils (just like OEM systems). Some of our competitors market small street rod type units that contain only one coil or know as a common block coil. The overall size of the coil is compromised by circuiting heater tubes and A/C tubes into one coil, therefore creating less surface area to cool the air as it passes through the coil for less cooling capacity. Remember, smaller is never better when it comes to coil/case size! Size matters.
Our excellent reputation for uncompromised quality, component selection and attention to detail is evident in all aspects of our product line! Every component was chosen on its superior design and quality rather than a low cost.

VAPIR 3 SYSTEM MEASUREMENT
VAPIR 3 SYSTEM MEASUREMENT 2

 

– Exclusive aluminum multi-mount system, standard in black, available in colors such as satin, red, blue, or polished
– Larger and separate coils, (Faster and more thorough Heat Transfer, Faster Cool-downs)
– Copper tubing for years of trouble-free service
– Highest quality interior doors and largest bearing surface for no door motors  bushings
– Preset thermostat for the coldest temperatures always with no user adjustment needed… ever!
– Tough, ABS Case All electric state-of-the-art servo motors

 

 

– SPAL Brand Variable Speed Fan for best air output in the industry
– Compact, high output, OEM quality… in a durable design for with balanced assembly (no vibration) and low noise.
– All our systems are designed for easy upgrades. When new technology becomes available, it-s plug-n-play! Never obsolete
– We-ve designed our cases to provide optimal, unobstructed airflow. Even our openings are designed larger.
– Better case design means better and greater airflow (DirectPass Airflow technology)
– With the Evaporator still in the vehicle you can service the following:
– Blower Motor Removal
– Expansion Valve Removal
– Thermostat Removal

 

SYSTEM OVERVIEW

VAPIR 3 DRAWING

MEMBRANE

Membrane, by Restomod Air is the only true thermal insulation with sound dampening material. We found that custom car builders were using standard “sound dampening” material in their builds, and were unaware that it did not provide insulation from the outside elements. Membrane four-layer material that prevents your vehicle from being robbed of the climate control temperature you have set in the cabin while giving you sound dampening.

MEMBRANE INSULATION INSIDER:

IT’S DIFFERENT

Membrane focus is on Thermal Protection. We noticed that most custom car builders thought the “sound dampening” material they were using also block out the heat. This is not true. Membrane is the only material that does this. This is just not an add-on “liner” to place on your vehicle’s body to muffle noise or rattle. Membrane is a true fortification between your vehicles cabin and the outside world.

FOUR LAYERS OF PROTECTION

Membrane’s four-layer material is like nothing else found on the market. Layer one is foil for durability, layer two is a close cell insulation foam rubber for thermal protection, layer three is another foil layer for structural integrity, and layer four is the butyl layer for sound dampening.

2 IN 1 DESIGN

Membrane is the only true Thermal Insulator for custom car builders. And with the 2 in 1 Design, there is an added Sound Dampening layer. Membrane’s 2 in 1 design works in congruence to prevent loss of your desired temperature in your cabin while eliminating noise from the outside. By preventing unwanted temperature fluctuation from outside the cabin and noise interference Membrane by Restomod Air is the only true barrier from the elements your vehicle can have.

EASY TO USE

Membrane is simple to use. Measure, cut, and peel to apply to your vehicle. Membrane conforms to all the curves and angle your ride offers, without having an odor or being messy like drip materials. No one wants that. Restomod Air understands that you have put a lot of time and hard work into your build because we are car guys like you. We will not just put anything in our own build, so why should you?

MEMBRANE INSULATOR AND SOUND DAMPENER OVERVIEW DRAWING FOUR LAYERS OF PROTECTION 1 1

INCLUDED IN A/C KIT

  • $200 saving on bundle deal
  • Evaporator Unit (Heat & Cool)
  • discount on any signature vents of your choice
  • electric water control valve
  • ECU
  • all wiring harnesses
  • weldable threaded studs and nuts for smooth firewall mounting
  • Hex head bolts and nuts for though firewall mounting
  • condensation drain tube w/ elbow & grommet
  • (2) 2 Ft heater hoses for interior bulkhead install
  • (2) A/C hoses for interior bulkhead install
  • Membrane (2) Boxes
  • heater hose clamps
  • all needed screws, bolts, washers
  • 15ft duct hose
  • installation instructions
  • personalized tech support
  • jealousy from members of your car club
  • heater & A/C fittings for interior bulkhead install
Discussion (0)

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Or

Register

Registering for this site allows you to access your order status and history. Just fill in the fields below, and we'll get a new account set up for you in no time. We will only ask you for information necessary to make the purchase process faster and easier.
Register

Continue as a Guest

Don't have an account? Sign Up